Key Features (per node)
1. Single socket H4 (LGA 1151) supports
Intel® Xeon® processor E3-1200 v6/v5,
Intel® 7th/6th Gen. Core™ i3 series,
Intel® Celeron® and Intel® Pentium®
2. 2x 3.5" SATA3 by default; 2x 2.5"SATA3 HDDs w/ Optional kits
3. Up to 64GB ECC UDIMM DDR4-2400MHz in 4 sockets
4. 2 GbE LAN ports via Intel i350,1 dedicated IPMI LAN port
5. 1 PCI-E 3.0 x8 and 1 Micro-LP
6. 2 USB 2.0, 1 VGA, 1 COM port,(with KVM dongle)
7. 1 USB 3.0 (Type A), 1 SATA DOM
8. 4 heavy duty hot-swap 8cm fans withoptimal cooling zone (per system)
9. 1600W Redundant power supplies Titanium Level Certified (per system)
|
SuperServer |
|
|
|
CPU |
- Single Socket H4 (LGA 1151) supports:
- Intel® Xeon® processor E3-1200 v6/v5,
Intel® 7th/6th Gen Core™ i3, Intel® Pentium®, Intel® Celeron® processors
- CPU TDP up to 80W
|
Note |
BIOS version 2.0 or above is required to support Intel® Xeon® Processor E3-1200 v6 series or 7th Generation Intel® Core™ Processors |
|
|
Memory Capacity |
- 4x 288-pin DDR4 DIMM slots
- Supports up to 64 GB DDR4 ECC Un-Buffered memory (UDIMM)
|
Memory Type |
- 2400MHz/2133MHz ECC DDR4 SDRAM 72-bit, 288-pin gold-plated UDIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
|
PCI-Express |
- 1 PCI-E 3.0 x8 Low-profile slot
- 1 Micro-LP for Dual GbE (pre-installed); 10GbE or IB AOC optional
|
|
|
Micro-LP NIC |
- Intel® i350 GbE controller
- Dual RJ-45 connectors
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/O Acceleration Technology (I/O AT)
- MicroLP Adapter Matrix (Networking options)
|
|
|
Chipset |
|
SATA |
- SATA3 (6Gbps) via C236 controller
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
Headers |
|
Graphics |
- ASPEED AST2400 Graphics (BMC with Graphic controller)
|
|
|
SATA |
|
LAN |
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
DOM |
- SATA DOM (Disk on Module) power connector support
|
KVM |
- 1 VGA, 1 COM and 2 USB 2.0 (with KVM dongle)
|
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- DMI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
|
Switch |
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Package |
- 11.65" (H) x 26.26" (W) x 34" (D)
|
Weight |
- Net Weight: 62.2 lbs (28.21 kg)
- Gross Weight: 88 lbs (39.92 kg)
|
Color |
|
|
|
Buttons |
|
LEDs |
- Power LED
- Node status LED
|
|
|
Internal |
- 2 Hot-swap 3.5" SATA3 (6Gbps) HDDs per node (or 2x 2.5" SATA3 with optional kits); up to 16 HDDs total
- Enterprise SATA HDD only recommended
|
|
|
|
Fans |
- 4 Heavy duty 8cm fans with optimal cooling zone
|
|
1600W 1U Redundant Power Supplies with PMBus |
Total Output Power |
|
Dimension (W x H x L) |
|
Input |
- 100-140Vac / 10-7A / 50-60Hz
- 180-240Vac / 11-8A / 50-60Hz
|
+12V |
- Max: 67A / Min: 0A (100-140Vac)
- Max: 133A / Min: 0A (180-240Vac)
|
+5Vsb |
|
Output Type |
- 27 Pairs Gold Finger Connector
|
Certification |
UL/cUL/CB/BSMI/CE/CCC Titanium Level [ Test Report ] |
|
|
CPU |
- Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 3-Phase-switching voltage regulator with auto-sense from 0.5V-2.3V
|
FAN |
|
Temperature |
- Monitoring for CPU and chassis environment
|
|
|
RoHS |
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|