1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4†/ v3 family; QPI up to 9.6GT/s
2. Up to 3TB† ECC 3DS LRDIMM , up to DDR4- 2400†MHz ; 24 DIMM slots
3. 2 PCI-E 3.0 x16, 1 PCI-E 3.0 x8
4. SIOM for flexible networking options
5. 48 Hot-swap 2.5" SAS3/SATA3 drive bays; optional 2 Hot-swap 2.5" rear SATA drive bays
6. Onboard Broadcom 3108 SAS3 HW RAID RAID 0, 1, 5, 6, 10, 50, 60
7. Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
8. 5 Hot-swap 8cm redundant PWM fans
9. 1600W Redundant Power Supplies Titanium Level (96%)
|
SSG-2028R-E1CR48N |
- SuperServer 2028R-E1CR48N (Black)
|
|
|
CPU |
- Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
- Dual Socket R3 (LGA 2011)
|
Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
System Bus |
|
Note |
† BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
|
|
Memory Capacity |
- 24x 288-pin DDR4 DIMM slots
- Up to 3TB† ECC 3DS LRDIMM, 768GB ECC RDIMM
|
Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes |
- RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
|
|
|
Chipset |
|
SAS3 |
- Broadcom 3108 SAS3 onboard
- Hardware RAID 0, 1, 5, 6, 10, 50, 60
|
SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers |
- SIOM support for flexible networking options
|
Video |
|
|
|
LAN |
- LAN ports via SIOM Add-On-Card
|
USB |
- 3 USB 3.0 ports (2 rear + 1 Type A)
|
Video |
|
Serial Port / Header |
- 1 Fast UART 16550 port / 1 Header
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Width |
|
Height |
|
Depth |
- 30.2" (767mm)
- With Cable Management Arm Installed:
35.2" (895mm)
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Overheat LED
- Power fail LED
|
|
|
PCI-Express |
- 2 PCI-E 3.0 x16 slots
- 1 PCI-E 3.0 x8 slot
|
|
|
Hot-swap |
- 48 Hot-swap 2.5" SAS3/SATA3 drive bays
- Optional 2 rear Hot-swap 2.5" SATA drive bays
|
|
|
Two 24 port SAS3 12G expander backplanes, each supporting up to 24x 2.5" SAS3 drives |
|
|
Fans |
- 5 Hot-swap 8cm redundant PWM cooling fans
|
|
1600W Redundant Power Supplies with PMBus |
Total Output Power |
|
Dimension (W x H x L) |
|
Input |
- 100-127Vac / 13 - 9A / 50-60Hz
- 200-240Vac / 10 - 8A / 50-60Hz
|
+12V |
- Max: 83.3A / Min: 0A (100-127Vac)
- Max: 133A / Min: 0A (200-240Vac)
|
12Vsb |
|
Output Type |
- 25 Pairs Gold Finger Connector
|
Certification |
UL/cUL/CB/BSMI/CE/CCC Titanium Level [ Test Report ] |
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
|
|
RoHS |
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|